WAEC GCE 2024 CHEMISTRY
PRACTICAL ANSWERR

(1)



=============================

(2)


OR



=============================

(3a)
(i) Distillation (for liquids with different boiling points).
(ii) Fractional distillation (for miscible liquids with closer boiling points).

(3bi)
Tongs
(PICK ANY ONE)
(i) Holding hot test tubes, beakers, or crucibles during heating.
(ii) Picking up small pieces of substances or glassware.
(iii) Removing a hot lid from a container.
(iv) Gripping and placing objects into a furnace or flame.

(3bii)
Wire gauze
(PICK ANY ONE)
(i) Supporting glassware (like a beaker) over a flame.
(ii) Distributing heat evenly under a heated container.
(iii) Preventing direct contact between glass and flame to reduce breakage.
(iv) Acting as a platform for conducting flame tests.

(3biii)
Beehive shelf
(PICK ANY ONE)
(i) Supporting a gas jar during gas collection over water.
(ii) Keeping the gas jar stable while transferring gases.
(iii) Directing gas from the delivery tube into the gas jar.
(iv) Serving as an intermediary platform to avoid gas loss during collection.

(3biv)
Spatula
(PICK ANY ONE)
(i) Transferring small amounts of solid chemicals from containers.
(ii) Mixing solid substances or scooping powders for weighing.
(iii) Scraping residues from containers.
(iv) Adding controlled amounts of a solid to a reaction mixture.

(3c)


=============================
=============================





WAEC GCE 2024 CHEMISTRY THEORY AND OBJ


CHEMISTRY OBJ:
1-10: CCBBADBABB
11-20: BADBCDACBB
21-30: ABBBBDAAAB
31-40: DBBDDABCBC
41-50: DBCBACCDDA


(1)



=============================

(2)


(2d)
CCL4 has a lower boiling point than CBr4 because CBr4 has a higher molecular mass and stronger London dispersion forces, resulting in greater intermolecular attractions.

============================

(3)




=============================

(4ai)
The industrial preparation of ammonia is typically done through the Haber-Bosch process. This process involves the reaction between nitrogen and hydrogen gases at high temperature and pressure, with the use of a metal catalyst to increase the rate of the reaction.

(4aii)
(PICK ANY ONE)
(i) Increasing the pressure of the reaction.
(ii) Decreasing the temperature of the reaction.
(iii) Using a more effective catalyst.
(iv) Removing the ammonia from the reaction mixture as it is formed to shift the equilibrium towards the products.

(4aiii)
(PICK ANY TWO)
(i) Fertilizer production
(ii) Household cleaning products
(iii) Refrigeration
(iv) Explosive manufacturing
(vi) Textile processing
(vii) Wastewater treatment

(4bi)
(i) Screening
(ii) Coagulation and flocculation
(iii) Sedimentation
(iv) Filtration
(v) Disinfection

(4bii)
(i) Screening: Removes large debris and particles from the water.
(ii) Coagulation and flocculation: Causes small particles to clump together, making them easier to remove.
(iii) Sedimentation: Allows the clumped particles to settle out of the water.
(iv) Filtration: Removes any remaining small particles and contaminants from the water.
(v) Disinfection: Kills any remaining microorganisms in the water, making it safe for consumption.

(4c)
A laboratory test for hydrogen chloride gas can be done by passing the gas through water, which will form a solution of hydrochloric acid. The presence of hydrogen chloride gas can be detected by the formation of white fumes when a glass rod dipped in ammonia solution is brought near the test solution. The intensity of the white fumes can be used to estimate the concentration of the hydrogen chloride gas.

============================

(5ai)
Allotropy is the existence of an element in two or more different forms (allotropes) in the same physical state, with each form having distinct atomic arrangements and properties. Examples include diamond and graphite for carbon.

(5aii)
(I) Carbon - Diamond or Graphite
(II) Sulphur - Rhombic sulphur or Monoclinic sulphur

(5bi)
The CO? gas is impure because it contains other gaseous impurities such as water vapor and traces of unreacted hydrochloric acid vapor.

(5bii)
concentrated sulphuric acid

(5ci)
(i) Add freshly prepared iron(II) sulphate solution to the test sample.
(ii) Carefully add concentrated sulphuric acid down the side of the test tube.
(iii) A brown ring forms at the junction of the two liquids, indicating the presence of nitrate ions (NO??).

(5cii)
(i) Dissolve calcium chloride in water to form a calcium chloride solution.
(ii) Add a solution of sodium carbonate (or sodium trioxocarbonate (IV)) to the calcium chloride solution.
(iii) A white precipitate of calcium trioxocarbonate (IV) forms.
(iv) Filter the mixture to collect the precipitate.
(v) Wash the precipitate with distilled water and allow it to dry.

(5di)
(i) Both are made up of carbon atoms.
(ii) Both have covalent bonds between the carbon atoms.

(5dii)
Diamond has a tetrahedral structure, where each carbon atom is bonded to four other carbon atoms. In contrast, graphite has a layered structure, with each carbon atom bonded to three others in hexagonal sheets

(5diii)
Diamond is hard because of its 3D tetrahedral network where all carbon atoms are covalently bonded, forming a rigid structure WHILE Graphite is soft because its layers are held together by weak van der Waals forces, allowing them to slide over each other easily.

(5e)